国产高清无码视频在线看

精品99爱免费视频在线观看

 College of Mechanical Engineering
Home page College profile Teaching staff Specialty construction Discipline construction Party mass work Student work Enrollment and employment Professional certification
Enrollment and employment
Enrollment brochures
Question and answer
Employment guidance
Employment information
Innovation and Entrepreneurship Education
Your location: home page > Enrollment and employment > student recruitment brochure
Enrollment guide of Jilin Normal University of engineering and technology in 2020

School profile

Jilin Normal University of engineering and technology is located in Changchun, the capital of Jilin Province. It is the first full-time undergraduate normal college in China, which is established with the approval of the State Council. It is also the only independent full-time undergraduate Vocational Normal College in Northeast China and Inner Mongolia. The predecessor of the school was the technical school of Jilin Provincial Labor Department, which was established in 1959; In 1979, Jilin Technical Teachers College was established with the approval of the State Council, which was subordinate to the former State Administration of labor; In 1983, it was under the management of Jilin Province and renamed as Jilin Vocational Normal College; In February 2002, it was renamed Jilin Normal University of engineering and technology with the approval of the Ministry of education.

Over the past 60 years, several generations of teachers have adhered to the spirit of "study hard, work hard, seek truth and innovation" and the spirit of "striving for perfection, respecting teachers and advocating learning". They have overcome difficulties and overcome difficulties and forge ahead. They have gone through the development stages of arduous entrepreneurship, exploration of characteristics, acceleration of construction and connotative development. The scale of school running is expanding, the quality of education is constantly improving, and the characteristics of school running are gradually highlighted, Service functions have been continuously enhanced. The school is the national key construction vocational education teacher training base determined by the Ministry of education; Jilin Provincial People's government determines the leading unit for the construction of the province's vocational education guarantee system; Director unit of transformation and development alliance of local undergraduate universities in Jilin Province; Jilin Province transformation development demonstration University; Jilin province undergraduate talent training reform demonstration University; Jilin Province characteristic high level application university.

Serving vocational education and local areas has distinctive characteristics. With vocational teacher education as the core function and application-oriented professional education as the main line, the school has formed a school running pattern of "Trinity" of Vocational and Technical Teacher Education, higher engineering education and higher technical education, and "dual support" of vocational education teacher training and training. On the attribute of running a school, it adheres to the unity of application, pedagogy and academic; In terms of school running characteristics, it should highlight the characteristics of vocational normal education; In terms of connotation and carrier construction, it has always been committed to the construction of four centers, namely, vocational teacher training, vocational education scientific research and vocational education information service; In terms of serving the overall situation of vocational education, we should pay attention to the following four main functions: the guarantee of Vocational Teachers' qualification, the guidance of vocational education scientific research, the demonstration of education and teaching and the construction of vocational education culture.

The conditions of running a school are excellent and the scale of running a school is constantly expanding. The school has four campuses: Kaixuan campus, Changde campus, hi tech campus and Tailai campus. The school covers an area of 830000 square meters, with a construction area of 310000 square meters, and the total value of teaching and scientific research instruments and equipment is 257578400 yuan. At present, there are 12837 full-time college students. There are 17 colleges, 1 teaching and research department, 3 interdisciplinary research institutes, 16 science and technology research centers and 12 research centers (institutes).

Firmly establish the leading position of discipline construction and coordinate the development of disciplines and specialties. Taking discipline construction as the leader, the university has 6 characteristic high-level disciplines in Jilin Province, 1 science and technology innovation center of Jilin Province, 1 Engineering Laboratory of Jilin Province, 1 innovation demonstration base of mass entrepreneurship in Jilin Province, 3 research bases in key fields of Social Science in Jilin Province, 1 Key Laboratory of digital publishing in Jilin Province, and 3 engineering research centers of colleges and universities in Jilin Province, There are 3 key laboratories in Colleges and universities in Jilin Province, 2 key research bases of Humanities and Social Sciences in Colleges and universities in Jilin Province, 1 think tank of new university with characteristics in Jilin Province, 1 think tank base of science and technology innovation of Jilin Province Association of science and technology, and 1 training base of innovation team of the first batch of vocational education teachers of the Ministry of education.

The school has always followed the working idea of "establishing a brand for advantageous majors and improving the quality of newly added specialties". It has continuously increased the strength of specialty construction, and established a professional system that is in line with the actual situation of the school and meets the needs of vocational education and economic and social development of Jilin Province. Now, it covers seven disciplines, including engineering, management, economics, art, literature, education and science, with a more reasonable professional structure. There are 52 undergraduate majors and 12 Higher Vocational Specialties. Among them, there are 1 national first-class undergraduate specialty, 2 national characteristic specialty, 1 national comprehensive specialty reform pilot specialty, 8 provincial characteristic specialty, 4 provincial characteristic high-level specialty, 6 provincial undergraduate university first-class specialty, 3 brand specialty construction points, and 3 pilot specialty of Jilin Province excellent engineer education and training plan, There are 1 national secondary vocational school excellent teacher training plan reform project and 3 provincial talent training mode innovation experimental areas.

To strengthen the construction of the curriculum system, there are 4 national excellent resource sharing courses, 13 provincial excellent courses, 54 provincial excellent courses, 4 provincial excellent online open courses, 8 online open construction courses, 1 provincial ideological and political demonstration course, 1 provincial school enterprise cooperation demonstration course, 2 provincial innovation and entrepreneurship Demonstration Courses, and 4 provincial gold courses.

Deepen the teaching reform and steadily improve the quality of personnel training. The school has won four second prizes of national teaching achievement award; He has won 28 teaching achievement awards of the 7th and 8th Jilin Province, and has undertaken nearly 500 teaching and research projects above the provincial level. Strengthen the practice teaching and base construction, do a good job in the "double certificate" assessment work, students' vocational qualification certificate pass rate of more than 90%, the current skill appraisal work covers 33 undergraduate majors. We have 347 stable off campus practice teaching bases, including 1 National College Students' off campus practical education bases, 3 provincial-level university students' off campus practical education bases, and 5 provincial-level "double teacher and dual ability" training bases. The school has been identified as a national pilot school of vocational skills appraisal by the Ministry of human resources and social security, and a national language standardization demonstration school by the State Language Commission. There are 4 provincial experimental teaching demonstration centers and 1 provincial engineering innovation training center of colleges and universities.

We will implement the strategy of improving scientific research and speed up the upgrading of scientific research. In the past five years, the university has undertaken 1501 scientific research projects, including 14 national projects; There are 334 scientific research projects above the provincial and ministerial level; 145 awards at all levels, including 67 provincial and ministerial awards; Published 1663 academic papers, 511 of which were included in SCI, EI, CSSCI, cpci-s, etc; 92 books have been published; 987 patents were authorized and 617 computer software copyrights were registered.

To implement the strategy of strengthening the school with talents, the structure of teaching staff has been continuously optimized. At present, there are 752 full-time teachers, including 108 professors and 295 associate professors. The proportion of double qualified teachers is more than 60%, and that of doctoral degree teachers is 30%. There are 44 part-time doctoral and master's supervisors. The school has won 2 teacher team construction projects of the Ministry of education, 5 vocational teacher training resources development projects, 1 excellent teacher training plan project, 1 national comprehensive professional reform project, 4 national education science planning projects, 2 national new engineering projects, and 70 education projects jointly conducted by the industry and Education Association of the Ministry of education; At present, there are 7 excellent teaching teams in Jilin Province and 2 innovation teams in Colleges and universities in Jilin Province; There are 25 high-level talents such as experts enjoying the special allowance of the State Council, senior experts of Jilin Province, young and middle-aged professional and technical talents with outstanding contributions, top-notch innovative talents, and famous teachers of Jilin Province. Among them, the number of Changbai Mountain scholars and skilled teachers ranks first in provincial colleges and Universities.

To create a brand of Vocational Education Culture and highlight the function of vocational education mother machine. The school has always held high the banner of serving vocational education, highlighting the function of vocational education mother machine in the characteristic development. The school has established the first Chinese Modern Vocational Education History Museum, the first vocational education Museum in China, the first provincial Vocational Education Alliance in China, and the first national vocational education development database, national vocational education literature and data monitoring center and digital Vocational Education Museum. It has established the first professional journal of Vocational Education in China, the first vocational education website and the only English magazine of Vocational Education in China at present. It has formed the "five journals, five newspapers and one network" vocational education academic communication platform covering the whole country and with wide influence. Vocational and technical education, edited and published by the University, has been rated as a Chinese periodical array double effect journal, a Chinese core journal, a RCCSE core journal, and an excellent academic journal with international influence, and won the "excellent journal" award of Jilin Provincial People's government. In 2017, vocational and technical education became the Key Laboratory of digital publishing in Jilin Province.

We have made remarkable achievements in international exchanges by promoting open school running. The University actively carries out international exchanges and cooperation among universities, and has carried out intercollegiate exchanges with universities in the United States, Russia, Australia, France, South Korea, Canada, Japan, Singapore, New Zealand, Thailand and other countries and Taiwan. To cooperate with Sehan University of Korea to hold the undergraduate cooperative education project of animation specialty; In cooperation with gyeong-1 University of Korea, the project of undergraduate cooperation in electrical engineering and automation was held. The school selected excellent teachers and students to Korea, New Zealand and Taiwan for short-term exchange study. At the same time, it broadened channels and introduced excellent teachers from Germany, America, New Zealand and South Korea to teach in our school. The university has signed educational cooperation agreements with more than 20 overseas universities, such as kyeongju University in South Korea, Waikato Institute of technology in New Zealand, Geller University in Thailand, rison group in Canada, and Fisher College in the United States. The university has carried out exchange projects such as cooperative running of schools, exchange of teachers and students, and exchange of staff visits.

Under the guidance of Xi Jinping's socialism with Chinese characteristics in the new era, the school will implement the spirit of the national provincial education conference, firmly grasp the favorable opportunity of Jilin's revitalization and development, accelerate the development of modern vocational education, and strengthen the province with higher education, and strive to promote the five major strategies of relocation and construction, transformation and development, scientific research promotion, talent strengthening school and characteristic development, Strive for the goal of building a first-class engineering Normal University in China!

Professional introduction

Mechanical design and manufacturing and automation

Training objectives: the major aims to cultivate all-round development of morality, intelligence, physique and beauty, have good teacher's ethics, be familiar with the teaching rules of vocational education, master the solid basic knowledge and skills of mechanical design and manufacturing and automation, and have the ability of mechanical product design, manufacturing and application, "Double qualified" talents who can be engaged in theoretical and practical teaching of related majors in secondary vocational and technical schools. At the same time, we will train applied senior engineering and technical personnel who can be engaged in design and manufacturing, scientific and technological development, application research, operation management and operation and sales in the field of mechanical manufacturing in the front line of industrial production.

Main courses: engineering graphics, advanced mathematics, theoretical mechanics, material mechanics, mechanical principle, mechanical design, mechanical manufacturing technology foundation, electrical and electronic technology, hydraulic and pneumatic transmission, mechanical manufacturing technology, engineering materials and molding technology, programmable controller, CNC processing technology and programming, vocational education psychology, modern education technology, and so on Professional teaching methods of vocational education.

Confer Bachelor of engineering degree

Mechanical Engineering (including material forming and control engineering, industrial design, intelligent manufacturing engineering, vehicle engineering) is enrolled according to major categories

Material forming and Control Engineering (4-year undergraduate program)

Training objectives: this major aims to cultivate students with comprehensive development of morality, intelligence, physique and beauty, with good teacher's ethics, familiar with the teaching rules of vocational education, mastering the solid basic knowledge and skills of material forming and control engineering, and having the application ability of material forming, mold design and manufacturing, "Double qualified" talents who can be engaged in theoretical and practical teaching in secondary vocational and technical schools. At the same time, we should train the application-oriented senior engineering and technical personnel who can be engaged in the design and manufacturing, technology development, operation management and sales in the field of material forming and control engineering in the enterprise production line.

Main courses: engineering graphics, theoretical mechanics, material mechanics, mechanical design basis, electrical and electronic technology, mechanical manufacturing technology foundation, material science foundation, material forming technology foundation, stamping forming technology and mold design, plastic molding process and mold design, mold manufacturing technology, mold CAD / CAM, CNC processing technology and programming, vocational education Vocational education psychology, vocational education professional teaching methods, etc.

Confer Bachelor of engineering degree

Industrial Design (4-year undergraduate program)

Training objectives: this major aims to cultivate application-oriented senior professionals who have the basic theoretical knowledge and application ability of industrial design, and can be engaged in industrial product modeling design, visual communication design, environmental design and teaching, scientific research work in enterprises, institutions, professional design departments and scientific research units.

Main courses: mechanics, electrotechnics, Fundamentals of mechanical design, industrial art, Fundamentals of modeling design, engineering materials, ergonomics, psychology, computer-aided design, visual communication design, environmental design, etc.

Confer Bachelor of engineering degree

Intelligent Manufacturing Engineering (4-year undergraduate program)

Training objectives: to cultivate and support the party's basic line, develop morally, intellectually and physically in an all-round way, political quality, knowledge and ability to meet the needs of the development of socialist market economy, modernization and social progress, have the spirit of innovation and practical ability, have the basic knowledge and application ability of intelligent manufacturing, and be able to engage in products based on advanced information technology Intelligent design and manufacturing of equipment and production line, scientific and technological development, application research, operation management and other aspects of work, can be engaged in relevant professional theory and practice teaching in secondary vocational and technical schools.

Main courses: engineering drawing, electrical and electronic technology, theoretical mechanics, material mechanics, mechanical design basis, principle and application of single chip microcomputer, mechanical engineering control basis, electromechanical drive control, sensor and detection technology, CNC processing technology and programming, principle and application of programmable controller, industrial Internet, industrial robot, intelligent production planning management MES / ERP Automatic manufacturing system, etc.

Confer Bachelor of engineering degree

Vehicle engineering (4-year undergraduate program)

Training objectives: this major aims to cultivate the basic knowledge and skills of vehicle engineering, especially the basic knowledge and skills involved in mechanical, control, automobile and other disciplines, and be competent in automobile design, manufacturing, R & D, automobile aftermarket service and automobile business management; They are high-quality application-oriented compound talents who are familiar with the teaching rules of vocational education, have the vocational education ability of vehicle engineering specialty, have good professional ethics and innovation ability, and are engaged in automobile related professional education and teaching, automobile design, R & D and testing and other application or management posts.

Main courses: engineering graphics, mechanical design, electrical and electronic technology, control engineering technology, material mechanics, theoretical mechanics, automobile structure, automobile detection and fault diagnosis, automobile hydraulic and pneumatic transmission, automobile theory, intelligent networked vehicle technology, etc.

Confer Bachelor of engineering degree

Mechanical and Electronic Engineering (4-year undergraduate program)

Training objectives: this major aims to cultivate all-round development of morality, intelligence, physique and beauty, have good teacher's ethics, be familiar with the teaching rules of vocational education, master solid basic knowledge, basic skills and basic methods of mechanical and electronic engineering, and have the ability of design and manufacturing, detection control and Engineering application in the field of mechanical and electrical engineering, Facing the secondary vocational school engaged in related professional theory and practice teaching work, "double qualified" talents with both ability and integrity. At the same time, we should train senior engineering and technical personnel who can be engaged in mechanical and electrical product development, control and mechanical manufacturing technology research in the production line of enterprises.

Main courses: engineering graphics, theoretical mechanics, material mechanics, mechanical design basis, CNC processing technology and programming, computer aided design and manufacturing, mechanical and electrical technology foundation, mechanical engineering control basis, principle and application of single chip microcomputer, sensor and detection technology, programmable controller, fault diagnosis and maintenance of CNC machine tools, CNC processing technology and programming Vocational education, vocational education psychology, vocational education professional teaching methods, etc.

Confer Bachelor of engineering degree

Mechatronics Technology (three years of Higher Vocational Education)

Training objectives: this major is oriented to the mechanical parts production and equipment manufacturing industries and enterprises, cultivate the all-round development of morality, intelligence, physique and beauty, have good professional quality, master the necessary basic knowledge, basic skills and application methods of mechanical and electrical integration technology, master the CNC machining, basic electrical control technology of numerical control machine tools, and have strong parts process design Programming and CNC machine tool operation ability, can be engaged in the production line of CNC processing, equipment control, maintenance and operation management of senior technical and skilled personnel.

Main courses: mechanical drawing, mechanical principle, engineering mechanics, mechanical and electrical technology foundation, mechanical design, mechanical manufacturing technology foundation, numerical control processing technology and programming, sensor and testing technology, hydraulic and pneumatic transmission, electromechanical transmission control, electrical control and PLC application technology, fault diagnosis and maintenance of CNC machine tools, industrial enterprise management The course design of cartographic comprehensive surveying and mapping, mechanism technology course design, general processing skill training, NC machining skill training, CNC machine tool fault diagnosis and maintenance, enterprise practice, graduation design.

Robotics Engineering (4-year undergraduate program)

Training objectives: this major aims to cultivate all-round development of morality, intelligence, physique, beauty and labor, master robot structure and control technology, robot sensor technology, industrial robot system integration and programming, microprocessor system and network technology, and have the ability of industrial robot system integration, industrial machine manual station design, robot control and application, It is a senior application-oriented talent who can be engaged in the design, manufacturing, maintenance and management of industrial robot workstation, automatic production line and intelligent industrial system in the field of industrial automation system integration robot technology.

Main courses: mechanical basis and mechanism of robot, introduction to robotics, programming and Simulation of industrial robot, detection and robot sensor technology, hydraulic and pneumatic, motion control system, industrial fieldbus technology and system integration technology of industrial robot.

Confer Bachelor of engineering degree

Measurement and control technology and instrument

Training objectives: to cultivate students who support the party's basic line, develop morally, intellectually, physically, aesthetically and laboriously in an all-round way, love vocational education, have a sense of social responsibility and good scientific, engineering and humanistic qualities, master the basic theoretical knowledge of measurement and control technology, and have the ability to design and manufacture measurement and control instrument system and application development; Proficient in the basic methods of education and teaching, with strong vocational education teacher skills. Capable of being competent for the corresponding professional teaching posts in secondary vocational schools, the sustainable development of "double qualified" talents with "love vocational education, excellent teaching and outstanding skills"; Or engaged in the technical research, application and maintenance, operation management, marketing and other work of measurement and control technology and instrument in the specialty and related fields, and engineering technology application-oriented talents with strong engineering consciousness, good professional skills and high innovation ability.

Main courses: electronic technology foundation, automatic control principle and simulation, sensor principle and application, MCU interface technology, measurement and control circuit and device, intelligent instrument design, computer measurement and control technology and system, virtual instrument, etc.

Confer Bachelor of engineering degree

Automation (4-year undergraduate program)

Training objectives: to cultivate all-round development of morality, intelligence, physique, beauty and labor; To master the law of education and teaching in secondary vocational schools; Master the basic theory and automatic control technology of automatic control system, have solid theoretical foundation, skilled electrical equipment installation and debugging skills, and basic control system design ability. "Double qualified" talents engaged in teaching in electrical control technology, electrical operation and control and other related majors in secondary vocational and technical schools. At the same time, he can be engaged in electrical product development, electrical equipment installation, commissioning and operation, control electronic product development, control electronic product installation, debugging and maintenance, electrical engineering supervision, control system integration implementation, distribution system installation, operation and maintenance, electrical and control electronic product sales and other related industries Supervisor position.

Main courses: circuit, electronic technology (analog electronic technology and digital electronic technology), single chip microcomputer control technology and application, automatic control principle and simulation, power electronic technology and application, motor and drag technology, PLC control technology and application, industrial network technology and field bus, process control technology and system integration, motion control technology and application.

Confer Bachelor of engineering degree

Aircraft design and Engineering (4-year undergraduate program)

Training objectives: this major aims to cultivate a high sense of social responsibility, master the basic knowledge of aircraft design, basic theory and practical skills, innovative consciousness, practical ability, scientific research ability, and basic ability to engage in scientific research and engineering design of aircraft, It can also meet the needs of many engineering fields in society, and has good adaptability and development potential. Comprehensive development compound professional and technical personnel who can be engaged in research, design, development and management of aircraft overall design, structural design, aircraft automatic control, mechanical and electrical integration and other fields.

Main courses: aircraft overall design, aircraft principle and structure, aerodynamics, UAV system design and integration, aviation information perception technology, automatic control principle, electronic technology, etc.

Confer Bachelor of engineering degree

Electrical engineering and automation (Sino foreign cooperative education) (4-year undergraduate program)

Training objectives: this major aims to cultivate all-round development of morality, intelligence, physique, beauty and labor, have practical ability in Korean, solve technical problems in the field of electrical engineering, and innovate international leading electrical engineering products. Be competent in the electrical engineering fields such as power system and its automation, high voltage AC / DC transmission and power supply and distribution design, high and low voltage electrical equipment design and installation, power electronics and power transmission, smart grid and new energy development and utilization, as well as detection, electronic and control technology application and other electrical engineering fields Applied top-notch innovative talents with international education background in China and South Korea, working in power operation, electrical design, electrical equipment manufacturing, installation, commissioning, sales and other positions. The major of electrical engineering and automation is mainly for the posts of power system operation and maintenance, industrial and civil power supply and distribution design and construction, electrical engineering assembly and operation, installation and commissioning of high and low voltage electrical appliances.

Main courses: circuit, motor and electric drive foundation, power system analysis, power system relay protection principle and application, electrical control and PLC application, electrical part of power plant, DSP Principle and application, UHV transmission technology; Korean, digital engineering, automatic control engineering, microprocessor, power electronics engineering, power machinery, high voltage engineering, electrical equipment engineering, smart grid application, intelligent control, modern automation, new energy management system.

Confer Bachelor of engineering degree

Electrical automation technology (three years of Higher Vocational Education)

Training objectives: this major aims to cultivate engineering application talents with outstanding professional skills and strong adaptability, who have comprehensive development in morality, intelligence, physique, beauty and labor, have the ability to solve technical problems related to electrical engineering, have the concept and ability of creation, innovation and entrepreneurship, and be competent for electrical installation, electrical debugging, electrical testing, electrical maintenance and other electrical engineering fields, with outstanding professional skills and strong adaptability.

Main courses: circuit, electronic technology, motor and electric drive foundation, automatic control principle and application, single chip microcomputer interface technology, electrical control and PLC application, motion control system and application, automatic production line technology and application.

Automotive Service Engineering (4-year undergraduate program)

Training objectives: the major aims to cultivate all-round development of morality, intelligence and physique, have good teacher's ethics, be familiar with the teaching rules of vocational education, master solid basic knowledge, basic skills and basic methods of automobile service engineering, and have the ability of automobile marketing, testing and evaluation and management training in the field of automobile service engineering, For secondary vocational and technical schools can be engaged in automobile related professional education and teaching and have the quality of automobile service technician "double qualified" talents.

Main curriculum: Teachers' Vocational and technical training, vocational education, vocational education psychology, automobile structure, automobile electrical and electronic technology, automobile theory, mechanical drawing, automobile service engineering, automobile mechanical foundation, electrical and electronic foundation, etc.

Confer Bachelor of engineering degree

Signal and control of rail transit

Training objectives: according to the requirements of enterprises in rail transit industry and secondary vocational schools, the major cultivates the comprehensive development of morality, intelligence, physique, beauty and labor, and grasps the teaching law of rail transit major in secondary vocational schools; Master the basic theory of rail transit signal and control system and rail transit control technology, have solid theoretical foundation, proficient rail transit equipment installation, commissioning, control and maintenance skills, as well as rail transit system integration comprehensive design ability, to adapt to the current railway and urban rail transit construction and safe operation requirements. Engineering personnel in rail transit enterprises and "double qualified" applied talents engaged in teaching of rail transit signal and control related majors in secondary vocational and technical schools.

Main courses: Teachers' vocational technical training, vocational education, vocational education psychology, circuit analysis, electronic technology and application, engineering drawing (CAD), introduction to railway, rail signal and train control technology, classical control theory, computer interlocking system, application of single chip microcomputer technology in rail transit, electric control and PLC Technology of rail transit, train organization, etc.

Confer Bachelor of engineering degree

Automobile Inspection and maintenance technology (three years of Higher Vocational Education)

Training objectives: this major serves the integrated enterprises of automobile maintenance, automobile sales and after-sales service in the "automobile aftermarket", and cultivates high-quality technical and skilled personnel who are fully developed in morality, intelligence, physique, beauty and labor, and are familiar with the production process and organizational conditions of enterprises, which meet the requirements of China's socialist modernization construction, Train and master the solid basic theoretical knowledge of automobile inspection and maintenance major, have the ability of automobile maintenance skills, automobile detection technology and automobile evaluation ability, and be engaged in the work of after-sales service and production management in the fields of automobile technical service, automobile marketing service, etc

Main courses: Automotive Electrical and electronic foundation, automobile engine, automobile electrical appliances, automobile chassis

New energy vehicle technology (three years of Higher Vocational Education)

Training objectives: this major aims to cultivate all-round development of morality, intelligence, physique, beauty and labor, facing new energy integration enterprises, parts supporting enterprises, automobile after-sales service enterprises and management enterprises and institutions. In the production and service line, they can engage in the maintenance, inspection and management of new energy vehicles, and can independently learn new technology and knowledge related to occupation, They are applied skilled talents with good professional ethics, strong sense of responsibility and craftsman spirit of great powers.

Main courses: introduction to new energy vehicles, automobile structure, automobile electrical appliances, introduction to intelligent networked vehicles, management and maintenance of power battery of new energy vehicles, drive motor and control of new energy vehicles, quality management of vehicles, maintenance and fault diagnosis of new energy vehicles.

Journalism and communication (including editing and publishing, network and new media) are enrolled according to major categories

Editing and publishing (4-year undergraduate)

Training objectives: this major is a high level of Jilin Province (a) is a first-class undergraduate major in Jilin Province. Based on the internal law of editing and publishing discipline, this major cultivates all-round development of morality, intelligence, physique, beauty and labor, and actively adapts to the development needs of publishing industry under the new situation of media convergence. It has solid editing and publishing basic theory and professional knowledge, and is proficient in the skills of book and newspaper editing, digital editing, network editing and digital marketing, With the ability of topic selection and planning, information collection and editing, operation management and other capabilities, and can be engaged in digital editing and digital marketing in publishing industry such as newspapers and magazines, publishing houses, network media, etc. This major cooperates with Jilin daily newspaper group in running schools, setting up Jilin newspaper class, and jointly training master's degree students with Beijing Printing Institute.

Main courses: news interview and writing, newspaper editing practice, publishing marketing practice, printing business process, editing and publishing history, format design, publishing modern technology, editing and publishing laws and regulations, professional ethics, etc.

Confer Bachelor of Arts

Network and new media (four years of Undergraduate Education)

Training objectives: this major is a special specialty. Based on Jilin, facing the new media industry, we should cultivate all-round development of morality, intelligence, physique, beauty and labor to meet the needs of the society. We should have a firm and correct political position, good professional quality, a solid grasp of the basic theory of Journalism and communication, be familiar with the development and operation norms of the network and new media industry, and have the production and technology application of new media content, network marketing and planning Mobile Internet thinking and new media creativity and other capabilities, can be engaged in network and new media content planning, editing and production, promotion and operation and other related work in news media institutions, various portal websites, party and government organs or enterprises and institutions.

Main courses: introduction to network and new media, introduction to new media advertising, integrated journalism, creative writing, non-linear editing, digital multimedia works creation, new media product design and project management, new media marketing, new media data analysis and application, etc.

Confer Bachelor of Arts

Chinese language and Literature (4-year undergraduate program)

Training objectives: based in Jilin, facing the three northeast provinces and radiating the whole country, the major cultivates the comprehensive development of morality, intelligence, physique, beauty and labor for the basic education industry, has firm political direction, good professional quality of teachers, master the basic theory and basic knowledge of Chinese language and literature, understand the basic theory of Chinese education science, and have strong language expression ability Creative writing ability, literary aesthetic ability, with profound language and literature cultivation and broad cultural vision, can be engaged in Chinese teaching or teaching research excellent teachers.

Main courses: introduction to literature, introduction to linguistics, ancient Chinese, modern Chinese, ancient Chinese literature, modern Chinese literature, Chinese contemporary literature, foreign literature, creative writing, etc.

Confer Bachelor of Arts

Financial management (4-year undergraduate program)

Training objectives: the financial management major takes "based on the local, highlighting application, focusing on development" as the basic principle of personnel training, closely combines with the local economic transformation and development of Jilin Province and the demand of Jilin Province vocational education development for financial management professionals, and focuses on cultivating solid professional knowledge, outstanding practical ability, and professional knowledge Comprehensive quality of comprehensive financial management for the front line of the post of senior application-oriented personnel. Therefore, two training directions have been established: one is to train senior professionals of financial management who have good ideological and professional ethics, master solid theoretical knowledge and professional skills of financial management, and can engage in accounting practice, investment and financial management in intermediary institutions such as enterprises and institutions, financial institutions, accounting firms, etc; The second is to cultivate "double qualified" financial management teachers with good ideological and professional ethics, not only mastering solid financial management theory and professional skills, but also with advanced educational concepts and teachers' skills. They can engage in theoretical teaching, practical teaching and student management in Vocational and technical colleges.

Main courses: financial laws and regulations, accounting principles, finance, financial accounting, financial information system, cost accounting, financial management, management accounting, financial analysis, audit theory and practice.

Bachelor's degree in management

Business Administration (including marketing, human resource management, tourism management, administration) is enrolled according to major categories

Marketing (4-year undergraduate program)

Training objective: to cultivate and master the basic theory and knowledge of marketing major; Establish modern education concept, basic teaching theory, teaching method and modern education technology; They have the ability of education and teaching, scientific research, practice and innovation consciousness. They can be engaged in the theoretical teaching, practical teaching and management of marketing professional courses in vocational schools. They also have the modern marketing awareness. They have the ability to carry out market research, market development, commodity sales, marketing planning in the industry Marketing management and marketing integration and other working ability of application-oriented marketing senior personnel.

Main courses: management, marketing, consumer behavior, strategic management, accounting, financial management, human resource management, market research and research, channel design and management, new media marketing and precision advertising, marketing data analysis, Internet marketing, brand management, etc.

Bachelor's degree in management

Human resource management (4-year undergraduate program)

Training objectives: this major aims to cultivate good humanistic quality, master the basic theory and skills of human resource management, be familiar with the national personnel management policies, laws and regulations, and have strong operational ability of human resource management, High quality applied talents with innovative spirit and practical ability and "double qualification" vocational teachers who can engage in theoretical and practical teaching or management of human resource management and related professional courses in vocational schools.

Main courses: human resource management, strategic management, organizational behavior, organization and work design, labor relations and labor law, recruitment and talent evaluation, performance management, salary and welfare, training and human resource development, etc.

Bachelor's degree in management

Tourism Management (4-year undergraduate program)

Training objectives: closely combined with the needs of regional economic development, focus on cultivating high-quality application-oriented tourism enterprises and institutions with both political integrity and talent, good humanistic cultivation, solid tourism professional knowledge and professional skills, strong communication and coordination ability, professional development ability, innovation consciousness and entrepreneurship, and ability to engage in operation, management, planning and planning in tourism enterprises and institutions Skilled management talents, with strong curriculum teaching ability, teaching management ability, teaching research and research ability, can be competent for the teaching and management of tourism major in secondary and higher vocational colleges, and highlight the talent training goal of "industry manager + vocational teacher".

Main courses: introduction to tourism, tourism consumer behavior, tourism reception industry, tourism destination management, tourism economics, introduction to hotel management, travel agency management, tourism situational English, etc.

Bachelor's degree in management

Administration (4-year undergraduate)

Training objectives: committed to training all-round development of morality, intelligence, physique, beauty and labor, and mastering the basic theory and knowledge of administrative management; Establish modern education concept, basic teaching theory, teaching method and modern education technology; They have the ability of education and teaching, scientific research, practice and innovation consciousness, and can be engaged in the theoretical and practical teaching of administrative management courses in vocational schools, or the administrative affairs management and related work of other social organizations.

Main courses: management, politics, sociology, public management, administration, public policy, administrative law, e-government, office affairs management, writing and processing of administrative documents.

Bachelor's degree in management

Computer science and Technology (including computer science and technology, software engineering, digital media technology) according to the major categories of enrollment

Computer science and Technology (4-year undergraduate program)

Training objectives: this major aims to cultivate all-round development of morality, intelligence, physique and beauty, have good scientific literacy and humanistic knowledge background, love vocational education, be familiar with the basic theories and laws of modern education and teaching, master professional teaching methods, have strong vocational education teacher skills, have solid knowledge of Computer Science, systematically master the establishment of network and information security system Knowledge theory, methods and skills of safety management and safety maintenance, with the ability of new technology application and knowledge innovation, and qualified for the theoretical teaching and practical guidance of basic courses and professional courses related to the major in secondary vocational schools; Application oriented senior engineering and technical personnel who can be engaged in safety operation and maintenance, design and development, service management and comprehensive application in the fields related to this specialty.

Main courses: C language programming, data structure, computer composition principle, operating system, computer network, database principle, web program design, network security, web security, protocol analysis, firewall technology and application, vocational education, vocational psychology, modern education technology, education vocational skill training, professional teaching method Vocational education curriculum development.

Confer Bachelor of engineering degree

Software Engineering (4-year undergraduate program)

Training objectives: this major aims to cultivate "double qualified" talents with comprehensive development of morality, intelligence, physique, beauty and labor, master the teaching skills engaged in secondary vocational and technical education, have the basic knowledge of software engineering and information system, and can be competent for the teaching work of professional courses in Secondary Vocational and technical schools of relevant majors, or be engaged in software system design, development, operation, operation, etc Maintenance and management of practical engineering problems to solve the application of senior engineering and technical personnel.

Main courses: introduction to software engineering, software quality assurance and testing, data structure, operating system, database principle and application, web technology foundation, Java programming basis, Java advanced and Java EE, Android basic application development, Android advanced application development, vocational education, vocational education psychology, modern education technology, professional teaching methods, etc.

Confer Bachelor of engineering degree

Digital media technology (4-year undergraduate program)

Training objectives: this major aims to cultivate all-round development of moral, intellectual, physical, aesthetic and labor, with high ideological and moral quality, scientific and cultural literacy and artistic literacy, master the basic theory and professional skills of computer science and digital media technology, and be able to use digital media technology to create, design and develop digital art products such as special effects of film and television, digital games, virtual reality interaction, etc; Professional talents who can be engaged in system design, development and management in the fields of film and television virtual reality, human-computer interaction and game production, and vocational teachers who are competent for the teaching of digital media courses in vocational colleges.

Main courses: C language programming, data structure, computer composition principle, operating system, computer network, database principle and application, human-computer interaction principle and application, web technology foundation, computer graphics, digital image processing, three-dimensional animation design, virtual reality technology, game design, game engine technology, vocational education, vocational education psychology Modern educational technology, professional teaching methods, etc.

Confer Bachelor of engineering degree

Electronic Information Engineering (4-year undergraduate program)

Training objectives: this major aims to cultivate "double qualified" talents with comprehensive development of morality, intelligence, physique, beauty and labor, with high cultural quality and social responsibility, master the teaching skills of secondary vocational and technical education, have basic theoretical knowledge of electronic technology and information system, and be competent for the teaching work of professional courses in secondary vocational and technical schools, Can be engaged in electronic equipment and information systems and other professional fields of design, manufacturing, application and integration of applied senior engineering and technical personnel.

Main courses: circuit principle, analog electronic technology, digital electronic technology, signal and system, high frequency electronic circuit, digital signal processing, single chip microcomputer principle and application, communication principle, sensing and measurement technology, automatic control principle, vocational education, vocational education psychology, modern education technology, etc.

Confer Bachelor of engineering degree

Communication Engineering (4-year undergraduate program)

Training objectives: this major aims to cultivate all-round development of morality, intelligence, physique, beauty and labor, adapt to the needs of regional economic society, scientific and technological progress and social development, have good professional ethics and social responsibility, have healthy physical quality and aesthetic taste, have a strong spirit of innovation and entrepreneurship, master communication technology, electronic technology and information technology, "Double qualified" talents with good learning ability and computer application ability, the ability to discover, analyze and solve engineering problems by using professional knowledge, master the education and teaching rules and teaching skills of secondary vocational schools, and be competent for the teaching work of relevant specialties in secondary vocational schools; Application oriented senior engineering and technical personnel who can be engaged in application development, product design, network operation, technical management and support and technical training in the production, management and service industries of communication and network system, information system and electronic equipment.

Main courses: circuit principle, signal and system, high frequency electronic circuit, communication principle, single chip microcomputer principle and system design, Internet of things technology, C language programming, mobile communication technology, data communication, vocational education, vocational education psychology, modern education technology, professional teaching methods, etc.

Confer Bachelor of engineering degree

Computer application technology (three years of Higher Vocational Education)

Training objectives: this major is oriented to the needs of the industry and the field, cultivate the all-round development of morality, intelligence, physique, beauty and labor, have good political quality and moral cultivation, master the necessary theory and professional knowledge of the major, and have certain abilities of professional English reading, the use of commonly used computer software, computer system maintenance, multimedia production, database system management and development, Can be engaged in web design, website construction, database management and maintenance, computer software development, multimedia production and other work of high-quality skilled personnel.

Main courses: C language programming, Java programming foundation, UI design and development, data structure, operating system, computer network, database principle and application, Java advanced programming, 3D Max, Photoshop, large database, computer aided design, etc.

English (4-year undergraduate program)

Training objectives: English majors should have a high sense of social responsibility and correct values, develop morally, intellectually, physically, aesthetically and laboriously, love education, and be able to understand and abide by teachers' professional ethics; Master solid English language knowledge and communication skills, have a perfect professional knowledge structure, good humanistic quality and broad international vision; Master the basic theory of English education and teaching, have strong English teaching practice and management ability, scientific research ability, innovation ability and critical thinking ability; Excellent teachers who can be engaged in English teaching, research or related management in basic education stage.

Main courses: Comprehensive English, English Viewing, listening and speaking, oral English, English reading, English writing, English grammar, translation basis, general situation of English speaking countries, English academic writing and research methods, English teaching design and practice, English curriculum and teaching theory.

Confer Bachelor of Arts

German (4-year undergraduate program)

Training objectives: German major aims to cultivate students with good ideological and moral quality, scientific and cultural quality, humanistic quality, broad international vision, good professional quality and high professionalism; Have solid basic knowledge of German language, understand the situation of Germany, master certain professional knowledge of business or automobile, related language knowledge of a second foreign language, basic computer knowledge and basic operation skills; Have the ability to analyze and solve problems, innovation and entrepreneurship, comprehensive application ability of German, be able to master listening, speaking, reading, writing, translation and other German language skills, communicate in German, and have certain practical application ability of second foreign language; Applied German talents who can adapt to the needs of China's foreign exchange, national and local economic and cultural development, and are engaged in translation and management in various foreign-related industries such as commerce, automobile and other fields.

Main courses: comprehensive German, advanced German, German audio-visual oral, German conversation, German reading, advanced German audio-visual speaking, German writing, German interpretation, German translation, scientific German, German overview, second foreign language (English).

Confer Bachelor of Arts

Food science and Engineering (including food science and engineering, food quality and safety, food nutrition and inspection Education) are enrolled according to major categories

Food science and Engineering (4-year undergraduate program)

Training objectives: this major aims to cultivate the comprehensive development of morality, intelligence, physique and beauty, systematically master the basic theory and practical skills of food science and engineering, be familiar with the teaching theory and law of modern vocational education, master the professional teaching methods, and have the ability of food production management, food engineering design, food research and development, food sales and innovation and entrepreneurship, They can be competent for the teaching of theoretical and practical courses related to their major in secondary vocational and technical schools, or can be engaged in food process control, product research and development, food testing, sales and other work in brewing wine and food production, processing and circulation enterprises, food inspection institutions, supervision and management and other relevant departments.

Main courses: inorganic and analytical chemistry, organic chemistry, biochemistry, food microbiology, food chemistry, principles of food engineering, food technology, brewing technology, food nutrition and hygiene, food factory design, food analysis, functional food.

Confer Bachelor of engineering degree

Food quality and safety (4-year undergraduate program)

Training objectives: the major aims to cultivate all-round development of morality, intelligence, physique and beauty, systematically master the basic theories and basic skills in the field of food quality and safety, be familiar with the principles of food processing, food standards and regulations, and food analysis and detection technology, and have the ability to implement the food quality and safety management system, food analysis and detection, food sales ability and innovation and entrepreneurship ability, Can be engaged in the management, supervision, training, testing and sales of food quality and safety in food production, processing and circulation enterprises, food inspection institutions and supervision and management departments.

Main courses: inorganic and analytical chemistry, analytical chemistry, biochemistry, food chemistry, food technology, food microbiology, principles of food engineering, engineering drawing and CAD, food nutrition, food hygiene, food toxicology, food physical and chemical analysis, food standards and regulations, and food quality management.

Confer Bachelor of engineering degree

Food nutrition and inspection Education

Training objectives: this major aims to cultivate all-round development of morality, intelligence, physique and beauty, systematically master the basic theory and practical skills of food science, be familiar with the teaching theory and law of modern vocational education, master the professional teaching methods, and have the ability of food nutrition inspection, nutrition food development, nutrition guidance, sales and innovation and entrepreneurship, Application oriented talents who are competent for the teaching of theoretical and practical courses related to their major in secondary vocational schools, or engaged in functional food development, dietary nutrition guidance, food inspection, sales and other work in health food production, processing and circulation enterprises, food inspection institutions, supervision and management and other relevant departments.

Main courses: inorganic and analytical chemistry, organic chemistry, biochemistry, food chemistry, food microbiology, food nutrition, food toxicology, food physical and chemical analysis, food microbiological test, functional food, etc.

Confer Bachelor of engineering degree

Bioengineering (4-year undergraduate program)

Training objectives: the major aims to cultivate the comprehensive development of morality, intelligence, physique and beauty, systematically master the basic principles and methods of vocational education, be familiar with the teaching theory and law of modern vocational education, master the professional teaching methods, and have the ability of bioengineering design, drug production management, drug detection and innovation and entrepreneurship, Application oriented talents who are competent for the teaching of theoretical and practical courses related to their major in secondary vocational and technical schools, or engaged in drug research and development, production, management and quality inspection in the field of biopharmaceuticals.

Main courses: inorganic and analytical chemistry, organic chemistry, biochemistry, microbiology, principles of chemical engineering, principles and applications of immunology, molecular biology, biological reaction engineering, principles of fermentation engineering, biopharmaceutical technology, etc.

Confer Bachelor of engineering degree

Chemical engineering and industrial Bioengineering

Training objectives: the major aims to cultivate the comprehensive development of morality, intelligence, physique and beauty, systematically master the basic principles and methods of vocational education, basic knowledge and basic skills of chemistry, biological science and engineering, be familiar with the laws of education and teaching, design principles of fine chemical engineering and biochemical engineering, have the teaching ability of secondary vocational education, research and development of biochemical products and fine chemical products Process design and production management ability, innovation and entrepreneurship ability, can not only engage in teaching work in secondary vocational schools, but also be engaged in scientific research, product development and technical management in the fields of daily chemical industry, biological medicine and bioenergy.

Main courses: principles of chemical engineering, thermodynamics of chemical engineering, chemical reaction engineering, chemical transfer process, microbiology, principles of fermentation engineering, biological separation engineering, bioengineering equipment, alcohol technology, amino acid technology, etc.

Confer Bachelor of engineering degree

Fine Arts (four years of Undergraduate Education)

Training objectives: to cultivate middle school art teachers who are fully developed in morality, intelligence, physique, beauty and labor, are familiar with the concept of modern art education, art creation and performance ability, master the basic theory and skills of art education, and be competent for the task of art education and art culture communication, and lay a solid foundation for their becoming excellent teachers and art educators. The graduates of this major should reach the standard ability of middle school education certified by the Ministry of education.

Main courses: Chinese painting (fine brushwork of flowers and birds, Chinese painting figures, traditional Chinese painting landscape, contemporary Chinese painting), oil painting (oil painting foundation, comprehensive material techniques, oil painting figures, oil painting human body), watercolor painting (watercolor painting techniques, watercolor still life, watercolor figures, watercolor human body), printmaking (silk screen print, woodblock print), etc.

Bachelor of Arts

Arts and crafts (four years of Undergraduate Education)

Training objectives: this major aims to cultivate all-round development of morality, intelligence, physique and aesthetics, have a strong sense of innovation, aesthetic ability and practical ability, master the basic theoretical knowledge of aesthetics, have the ability to develop and produce handicrafts, and be able to develop and design packaging, book binding, ceramic art, toys and handicrafts in the field of handicraft or enterprise derivatives development and design Applied talents with high comprehensive quality in management and other aspects.

Main courses: material application design, fiber art, folk handicraft, ceramic technology, packaging technology, book technology production, handicraft design, etc.

Bachelor of Arts

Environmental design (4-year undergraduate program)

Training objectives: this major aims to cultivate all-round development of morality, intelligence, physique and beauty, with scientific thinking method, strong innovation consciousness and aesthetic ability, master the basic theoretical knowledge and design rules of environmental design, have the ability of space design, furnishing design, landscape design, effect drawing and construction drawing design and production ability, and be able to engage in indoor and outdoor decoration design in enterprises and institutions Applied talents with high comprehensive quality in construction.

Main courses: space design, furniture design, lighting design, drawing and recognition, model making, decoration materials and technology, landscape design, furnishing design, etc.

Bachelor of Arts

Visual communication design (4-year undergraduate program)

Training objectives: to cultivate all-round development of morality, intelligence, physique, aesthetics and labor, have a strong sense of innovation, aesthetic ability and design ability, master the basic theory and knowledge of graphic design, have the ability of hand-painted expression and computer drawing, and be able to face brand planning and promotion, corporate image design, advertising design, packaging design, graphic and computer art design Book overall design and other posts, engaged in planning and design, production, guidance and management of high-quality application-oriented talents.

Main courses: Book overall design, container and packaging design, poster design, visual image system design, guidance design, brand design and promotion.

Bachelor of Arts

Animation (Sino foreign cooperation in running schools) (four years of undergraduate schooling)

Training objectives: this major aims to cultivate all-round development of morality, intelligence, physique and beauty, master the scientific thinking method, have strong innovation consciousness and aesthetic ability, master the theoretical knowledge of Korean and film animation design, have the comprehensive ability of film and television animation editing and directing, 3D animation design, photography, post-processing technology production, etc., and be able to face the film, animation, film and animation design and production field in the field of film and television and animation design and production TV, film and television advertising industry and other enterprises and institutions, engaged in film and television animation design, column director, advertising director, photography, 3D animation, editing, post special effects production and other work with high comprehensive quality.

Main courses: Korean, animation law, original painting design, maya-1, maya-2, composition, perspective, special documentary, freeze frame animation, film animation sub shot, drama, film and television works appreciation, film and television photography, cartoon, film animation language, video editing software-1-2, etc.

Bachelor of Arts

Clothing and fashion design (four years of Undergraduate Education)

Training objectives: clothing and clothing design major is a traditional advantage specialty of the school. It is well-known in the province, has a certain influence in China, has advanced teaching equipment and strong teachers. The major carries out the teaching concept of "creativity changes life". From the perspective of life, it uses artistic language to communicate with the current clothing market to build a fashion education environment with application-oriented ability. In many years of construction, it has formed a combination of design and brand, creativity and market, curriculum and enterprise. It aims to cultivate high-quality application-oriented talents with strong artistic innovation spirit and practical ability, and can be engaged in fashion design, product development, clothing accessories design, display design, fashion information, creative planning, brand marketing and other related work in the clothing industry.

Main courses: Fashion painting, clothing color design, clothing pattern design, men's design, women's clothing design, creative clothing design, fashion structure design, fashion technology production, clothing three-dimensional design, clothing materials and re design, clothing accessories design, clothing history, clothing marketing, fashion information, fashion display design, brand clothing product development, etc.

Bachelor of Arts

Fashion design and Engineering (4-year undergraduate program)

Training objectives: clothing design and engineering is a traditional advantage specialty of the University, and is a provincial characteristic specialty. In 2018, it was rated as the first-class undergraduate major in Jilin Province. With perfect structure, strong strength, excellent academic tradition and innovative cultural atmosphere, professional teachers are excellent teaching teams at the provincial level. Combining with the development of China's clothing industry and the demand characteristics of professional talents, the major pays attention to the cultivation of students' comprehensive quality, innovation and entrepreneurial ability. At present, the major has become an important training base for clothing professionals and vocational teachers in Northeast China. It aims to cultivate high-quality applied talents who can be engaged in pattern design, process design, product planning, clothing buyer, fashion media, fashion computer-aided design, clothing management, marketing planning and other work.

Main courses: clothing color, clothing design, clothing structure design, clothing plate making and technology, garment three-dimensional cutting, clothing materials, Chinese and foreign clothing history, clothing social psychology, history of ethnic minority clothing, clothing CAD, computer-aided design, clothing market marketing, clothing brand planning, garment industrial plate making, garment production management, fashion communication Clothing buyers, etc.

Bachelor of Arts

Performance (four year undergraduate program)

Training objectives: this major aims to cultivate high-quality application-oriented talents who have certain basic theoretical literacy of Marxism, master the basic theories and skills of performing arts, have strong ability of artistic performance, language expression and etiquette service, and can be engaged in relevant work in the field of fashion show, film and television performance and aviation service management.

Main courses: body training, pre mirror awareness and fashion photography, fashion design, clothing color, fashion show theory and skills, clothing materials, fashion show director, fashion show organization and planning, image design, fashion display design, fashion professional English. Part of the courses are set by school enterprise cooperation units according to the training specifications of applied talents and the needs of enterprises.

Bachelor of Arts

Clothing and fashion design (three years of Higher Vocational Education)

Training objectives: this major aims to cultivate high-quality application-oriented talents with "double certificates" who have the basic theoretical knowledge and basic skills of clothing specialty, who are fully developed in morality, intelligence, physique and beauty, and are competent for the positions of enterprise board making, process manufacturing, technical guidance, technical innovation and design.

Main courses: clothing equipment, clothing materials, clothing production management, clothing design, clothing industry push plate, clothing technology production, knitting, embroidery, printing and dyeing, make-up, etc.

Flight attendants (three years of Higher Vocational Education)

Training objectives: to cultivate senior skilled talents with international vision, higher professional quality, certain professional basic knowledge and skills, strong foreign language ability, mastery of air service, air safety and disposal, image design and other skills, and able to engage in management and service work in aviation and related fields.

Main courses: cabin service, emergency response, civil aviation crew English, service awareness and service concept, civil aviation dangerous goods transportation, body and fitness, make-up, flight attendant etiquette, civil aviation laws and regulations and practice.

Mathematics and Applied Mathematics

Training objectives: this major aims to cultivate all-round development of morality, intelligence, physique, beauty and labor, master the basic theory, basic knowledge and basic methods of Mathematical Science, have the ability to use mathematical knowledge and use computers to solve practical problems, and be able to engage in mathematics teaching and research in the field of basic education and vocational education; Or in the production, operation and management departments engaged in data application, research and management of applied compound talents.

Main courses: mathematical analysis, advanced algebra and analytic geometry, ordinary differential equations, complex function, probability theory and mathematical statistics, general physics, C + + language, numerical analysis, mathematical model.

Conferring a Bachelor of Science Degree

Data science and big data technology

Training objectives: the major aims to cultivate all-round development of morality, intelligence, physique, beauty and labor, have good mathematical foundation and computer ability, master the basic theories, methods and skills of data science and big data technology, and accept the training of system integration ability, software design and development ability of big data engineering projects, Have certain big data scientific research ability and basic ability and quality of data science engineer post. After graduation, students can be engaged in big data analysis and data mining in various fields, big data system integration, management and maintenance, as well as big data research, consultation, education and training.

Main courses: mathematical analysis, advanced algebra and analytic geometry, probability theory and mathematical statistics, discrete mathematics, programming language, data structure, operating system, NoSQL, computer network, cloud computing, big data analysis, data mining, deep learning, data cleaning, Hadoop technology, spark application development, big data visualization, etc.

Confer Bachelor of engineering degree

Optoelectronic information science and Engineering

Training objectives: this major aims to cultivate high-quality application-oriented talents who meet the needs of regional social and economic development, have a certain theoretical basis, strong practical ability and innovation and transformation ability. Having solid professional basic theory, professional knowledge and professional skills, being familiar with the teaching law of vocational education, and being able to engage in the "double qualification" teaching of theory and practice in the field of secondary vocational education and basic education. At the same time, it can also be engaged in research, design, development, application and management in the field of optoelectronic information.

Main courses: introduction to theoretical physics, quantum mechanics, electrodynamics, mathematical and physical methods, Fundamentals of circuit analysis, electronic technology, engineering optics and experiments, laser principle and application, optical communication technology foundation, signal and system, optoelectronic technology and devices, photoelectric detection technology, principle and application of intelligent information processing technology, intelligent image processing technology Intelligent photoelectric system, vocational education, vocational education psychology.

Conferring a Bachelor of Science Degree

International economy and trade (4-year undergraduate program)

Training objectives: this major aims to cultivate all-round development of morality, intelligence and physique, master the basic situation and business knowledge of modern market economy and international trade, have a solid professional foundation, solid international trade operation skills, strong logical analysis ability, and be able to work in the field of economy and trade, for foreign-related enterprises, multinational companies, e-commerce enterprises, engaged in the preparation of documents, customs declaration and inspection Applied talents in correspondence production, business negotiation, cross-border e-commerce and trade management.

Main courses: international trade, international trade practice, international finance, international settlement, foreign trade documents, e-commerce, international marketing, international business negotiation, foreign trade correspondence, management, accounting, microeconomics, macroeconomics, international freight forwarding, econometrics, international commercial law.

Bachelor's degree in Economics

Logistics management (4-year undergraduate program)

Training objectives: this major aims to cultivate and establish socialist core values, a high sense of social responsibility and mission, good scientific and cultural literacy and international vision, systematically master the relevant professional theories and methods of logistics discipline, have strong innovation spirit, entrepreneurial awareness and certain innovation and entrepreneurship ability, and be able to conduct Logistics management, develop a strong sense of social responsibility and mission, and have a good scientific and cultural literacy and international vision Purchasing management and other related fields are engaged in logistics system optimization, logistics business operation and logistics practice research.

Main courses: logistics, management, statistics, supply chain management, logistics transportation management, warehousing and distribution management, logistics information system, procurement management, logistics facilities and equipment management, third party logistics, cold chain logistics management, chain operation management, logistics engineering, etc.

Bachelor's degree in management

Investment (4-year undergraduate)

Training objectives: this major aims to cultivate applied, compound and innovative talents who are law-abiding, have good psychological quality, have innovative spirit and ability, systematically master the professional knowledge and related skills of investment, and be able to engage in securities investment management and project financing management in non-governmental financial institutions and enterprises.

Main courses: political economy, accounting, microeconomics, macroeconomics, statistics, logic, finance, finance, econometrics, etc.

Bachelor's degree in Economics

E-commerce (4-year undergraduate program)

Training objectives: this major aims to cultivate all-round development of morality, intelligence, physique, beauty and labor, have Internet thinking and information economy concepts, have basic knowledge of economics, e-commerce, information technology, master the skills of network marketing and e-commerce operation, have a certain quality of network innovation and entrepreneurship, and be able to engage in e-commerce operation, application and application in various organizations Management, technical support and other work of economic compound, application-oriented, innovative talents.

Main courses: western economics, management, statistics, introduction to e-commerce, supply chain and logistics management, network economics, network marketing, e-commerce organization and operation, customer relationship management, e-commerce laws and regulations, Internet finance, e-commerce organization and operation, webpage design and production, website construction and management, cross-border e-commerce, etc.

Bachelor's degree in Economics

E-commerce (three years of Higher Vocational Education)

Training objectives: the major aims to cultivate all-round development of morality, intelligence, physique, beauty and labor, have a certain scientific and cultural level, good humanistic quality, professional ethics and innovation consciousness, strong employability, master the basic knowledge and skills of e-commerce, computer and network technology, and have strong basic knowledge and application ability of e-commerce, High quality comprehensive skilled talents who can be engaged in marketing promotion, e-commerce operation management, network customer service and other practical work in e-commerce and related fields, facing the sales personnel and business consulting service personnel in the Internet and related service industry, wholesale industry, retail industry and other industries.

Main courses: introduction to e-commerce, business image processing and animation production, business web page design and production, e-commerce website construction, network marketing, mobile e-commerce, cross-border e-commerce, e-commerce data analysis and application, customer service and management, online shop operation and management, etc.

Accounting (three years of Higher Vocational Education)

Training objectives: this major aims to cultivate all-round development of morality, intelligence, physique, beauty and labor, master the basic accounting theory and knowledge, and master the national policies, systems, laws and regulations on finance, taxation, accounting, finance, etc; With the ability of accounting, tax declaration, cost accounting and other financial processing capabilities, can be engaged in financial accounting, financial management, financial management and other front-line posts of modern enterprises in the fields of finance, management and accounting intermediary, as well as accounting agent, tax agent and financial consulting post of accounting intermediary Audit and other work of high-quality skilled applied talents.

Main courses: enterprise financial accounting, cost accounting and management, tax practice, accounting information system application, enterprise financial management, enterprise internal control, accounting system design, enterprise financial analysis.

Logistics management (three years of Higher Vocational Education)

Training objectives: this major aims to cultivate all-round development of moral, intellectual, physical, aesthetic and labor, with a certain scientific and cultural level, good humanistic quality, professional ethics and innovation consciousness, the spirit of craftsmanship, strong ability of employment and sustainable development, mastering the professional knowledge and technical skills of logistics management, facing the professional groups of warehousing, distribution, transportation, loading and unloading, packaging, etc, Capable of engaging in basic logistics business operation, logistics services and grass-roots management of high-quality technical and skilled personnel.

Main courses: introduction to logistics management, logistics transportation management practice, warehousing and distribution management, supply chain management, third party logistics, logistics information technology, introduction to e-commerce, express logistics management, logistics marketing, chain operation management, etc.

Pedagogy (four years of undergraduate schooling)

Training objectives: this major is a national first-class undergraduate specialty construction point, which adheres to the dual cultivation of educational research ability and educational practice ability with vocational education as the core. To train students to have modern education concept, master systematic pedagogy and psychology professional knowledge, have strong education teaching and management ability, be competent for secondary vocational school teaching, management, psychological consultation and counseling, and engage in education and human resource management, educational product planning and marketing in education and training institutions and other educational enterprises and institutions Curriculum management and education training of applied talents.

The main courses are: principles of pedagogy, Fundamentals of psychology, development psychology, curriculum and teaching theory, educational psychology, history of education at home and abroad, sociology of education, research methods of education, philosophy of education, principles of moral education, vocational education, curriculum design and development of vocational education, management of Vocational schools, etc.

Conferring bachelor's degree in Education

Pre school education (four years of undergraduate schooling)

Training objectives: this major aims to cultivate students with good thinking, plain face and high EQ quality, master the basic laws of physical and mental development and preschool education of preschool children, have solid professional solid, strong practical ability and adaptability to work, and be able to engage in children's education, teaching, management in kindergartens, early education institutions, children's education consulting agencies and secondary vocational schools Consulting, family education guidance and other work, to meet the needs of the reform and development of modern preschool education, "double qualified" talents with both professional theory and application.

Main curriculum: Pedagogy principles, psychological basis, Chinese and foreign preschool education history, preschool pedagogy, preschool psychology, design and guidance of preschool children's education activities, piano method, dance, art, preschool education hygiene, kindergarten activity design and guidance, education and research methods, preschool teachers' teaching language art, five major fields of theme teaching, parent education Kindergarten game guidance.

Enrollment plan



 
Number of visitors:

 

Copyright: Jilin Normal University of engineering and technology mechanical engineering school without permission, please do not reprint
Address: no.3050 Kaixuan Road, Changchun City, Jilin Province postcode: 130052

精品99爱免费视频在线观看_999精品视频会员在线观看_在线看AV一区二区三区

http://72.ricky99.cn http://48.ricky99.cn http://00.ricky99.cn http://79.ricky99.cn http://32.ricky99.cn http://69.ricky99.cn http://25.ricky99.cn http://25.ricky99.cn http://87.ricky99.cn http://26.ricky99.cn http://33.ricky99.cn